No-Lift Turner – Patient Transfer Device – With Handygrips
- Flat dimensions: 58″L x 29″W
- Can handle patients up to 250 lbs
- Unfilled with or without Handygrips
Product Description
No-Lift Turner – Patient Transfer Device Turning a resident can lead to staff back injuries and usually requires at least two staff members. The No-Lift Turner provides valuable help. The No-Lift Turner is a flat tube of fabric with a slippery interior surface. Simply position the patient on top of the tube just as you would a draw sheet. Now grab the reinforced edges of the top tube layer and pull it toward you. No lifting and less back strain! Once the No-Lift Turner is in position (placement generally requires two people), usually only one staff member is needed to go the side-lying resident onto his or her other side. Since the No-Lift Turner eliminates draw sheet drag and shear, the resident’s skin integrity is never compromised. Our research team has twisted residents up to 250 lbs. Flat dimensions: 52″L x 29″W. Black. Machine wash. Air dry. Disinfectant-safe. Here’s How The No-Lift Turner Works: Position the patient on one side of the bed in a side-lying position. Install the TURNER like a draw sheet; the TURNER should run the width of the bed. Pull the reinforced straps toward your body. The resident rolls over and is went to the bed’s opposite side. No need to remove the TURNER from beneath the resident. When another turning is required, just repeat from the other side of the bed. (Note: If patient has vastly sensitive skin, turner should be removed between uses.)
Buy Low-cost No-Lift Turner – Patient Transfer Device – With Handygrips
Related posts:
- Alliance Patient Lifts – Battery Powered Patient Lift
- Alliance HE Patient Lifts – Hydraulic Patient Lift HE
- Invacare Standard Patient Lift Sling with Commode Opening 9043 – Polyester Patient Lift Sling with Commode Opening 9153618908 – A13538
- Alliance Patient Lifts – Stand-Assist Lift
- Alliance Patient Lifts – Heavy Duty Lift