Mercury Drinking Water Test Kit
- Pot of 50 test strips for Mercury in drinking water
- No hazardous chemicals to mix
- MSDS is not required
- Consequences in less than 1 minute
- Sensitivity: 0, 2, 5, 10, 20, 40, 80 parts per billion
Product Description
Mercury Test Kit for Drinking Water (Boris’), in Water Test Strips. Kit contains a pot of 50 test strips to check for ordinary levels of mercury: 0, 2, 5, 10, 20, 40, 80 ppb (parts per billion). Result in 90 seconds. Boris’ Mercury Check for drinking water is a quick and simple method to test for levels of mercury in your drinking water source ( Hg – free dissolved ). Drinking Water Boris’ Mercury Water Test Kit has no identified interferences.
Alternative to wet chemical copper tests for several reasons:
* No hazardous chemicals to mix
* MSDS is not required
* Quick consequences are obtained in less than 1 minute
How to use Mercury Water Test Kit:
The test procedure for this test is simple and quick. Just dip one test strip into a 200 mL (7 oz) or greater water sample. Go the strip in a back and forth motion for 60 seconds. Remove the strip from the water sample and shake once to remove the excess water. Wait 30 seconds and then match to the closest color.
Boris Mercury Drinking Water Test Kit specifications:
* Sensitivity: 0, 2, 5, 10, 20, 40, 80 ppb (to convert to parts per million or mg/L, divide by 1000)
* Total test time: 90 seconds
* 50 tests per pot
EPA maximum contaminant level (MCL) in drinking water – 0.002 ppm , or 2 ppb (parts per billion).
US Patent No. 6541369
Buy Low-cost Mercury Drinking Water Test Kit
Related posts: